Proroute
GEM
2M
4G
Router
GEM-2M series User Manual
106
MIB-II (RFC 1213, Include IPv6)
IF-MIB, IP-MIB, TCP-MIB, UDP-MIB
SMIv1 and SMIv2
SNMPv2-TM and SNMPv2-MIB
AMIB (Proroute Private MIB)
1. SNMP Enable
: You can check “Local (LAN)”, “Remote (WAN)” or both to enable
SNMP function. If “Local (LAN)” is checked, this device will respond to the request
from LAN. If “Remote (WAN)” is checked, this device will respond to be request
from WAN.
2. WAN Access IP Address:
If you want to limit the remote SNMP access to
specific computer, please enter the PC`s IP address. The default value is 0.0.0.0,
and it means that any internet connected computer can get some information of
the device with SNMP protocol.
3. SNMP Version:
Supports SNMP V1 and V2c.
4. Get Community:
The community of GetRequest that this device will respond.
This is a text password mechanism that is used to weakly authenticate queries to
agents of managed network devices.
5. Set Community:
The community of SetRequest that this device will accept.
6. Trap Event Receiver 1 ~ 4:
Enter the IP addresses or Domain Name of your
SNMP Management PCs. You have to specify it, so that the device can send
SNMP Trap message to the management PCs consequently.
7. WAN Access IP Address:
The IP address of remote control site to manage the
device by using SNMP protocol.
A User Privacy table is used for only SNMP v3. It defines the user list and their
privacy and authority settings.
