Proroute
GEM
2M
4G
Router
GEM-2M series User Manual
34
1.
WAN-1
: The operation mode of first interface is forced to “
Always on
” mode,
and operates as the primary Internet connection. You can click on the respective
“
Edit
” button and configure the rest items for this interface.
1.
Physical Interface
: Select the WAN interface from the available list. For this
gateway, there is only “3G/4G” physical interface for Internet connection. To use
embedded 3G/4G modem to operate as the primary Internet connection
(WAN-1), please configure it with following parameters.
2.
Operation Mode
: Since there is only one physical interface as primary WAN
connection for the device, its operation mode must be "Always on".
3.
Line Speed
: You can specify the upstream / downstream speed (Mbps / Kbps)
for the corresponding WAN connection. Such information will be referred in QoS
function to manage the traffic load for each kind of services.
4.
VLAN Tagging
: If your ISP required a VLAN tag to be inserted into the WAN
packets, you can enable this setting, and enter the specified tag value.
Afterwards, click on “Save” to store your settings or click “Undo” to give up the
changes.
3.1.1.2 Internet Setup
There is only 3G/4G physical WAN interface in the device that you can configure it to
get proper Internet connection setup. It supports only one WAN type to connect to
Internet, 3G/4G. For 3G/4G WAN type, the ISP is a mobile operator that can provide
LTE, HSPA+, HSPA, WCDMA, EDGE, GPRS data services
9
. And the device,
attached with two SIM cards, can supports Dual-SIM failover mechanism for
uninterrupted Internet connection.
Hereafter are some details of 3G/4G WAN type configuration:
9
Different
models
have
different
specifications
of
embedded
3G
module.
Please
refer
to
specification
file
for
details.
