Proroute
GEM
2M
4G
Router
GEM-2M series User Manual
47
By default, all the LAN ports belong to one VLAN group, and this VLAN ID is forced to
denoted as “None”. It is a special tag-based VLAN for device to operated, there is no
tag required to be carried in the packets for this default VLAN group.
You can edit the default VLAN group by clicking on the "Edit" button. You also can
add one new VLAN group by clicking on the "Add" command.
1. VLAN ID
: Specify a VLAN tag for this VLAN group. The packets with the same
VID will be transferred between the client hosts of same VLAN group.
2. Internet
: Specify whether this VLAN group can access Internet or not. If it is
checked, all the packet will be un-tagged before it is forward to Internet, and all the
packets from Internet will be tagged with the VLAN ID before it is forward to the
destination belongs to this configuring VLAN group in the Intranet.
3. Port
: Specify what Ethernet LAN ports can deliver the packets that carry specific
VLAN tag for the VLAN group. You just have to check the boxes for dedicated
ports for the group. But the device has only one Ethernet LAN port.
4. DHCP Server
: Specify a DHCP server for the configuring VLAN. This device
provides 1 DHCP server to serve the DHCP requests from different VLANs.
Afterwards, click on “Save” to store your settings or click “Undo” to give up the
changes.
3.1.3 IPv6
Setup
The growth of the Internet has created a need for more addresses than are possible
with IPv4.
IPv6
(
Internet Protocol version 6
) is a version of the Internet Protocol (IP)
