8681330
10,000W CONSTRUCTION HEATER
V1.0
WITH ENCLOSED MOTOR
6
For technical questions call 1-800-665-8685
3. Do not expose the tool to rain or wet conditions. Water
entering a power tool will increase the risk of
electric shock.
4. Do not alter any parts of the tool or accessories. All parts
and accessories are designed with built-in safety features
that may be compromised if altered.
5. Make certain the power source conforms to requirements
of your equipment (see Specifications).
6. When wiring an electrically driven device, follow all
electrical and safety codes, as well as the most recent
Canadian Electrical Code (CE) and Canadian Centre for
Occupational Health and Safety (CCOHS).
WARNING! All wiring should be performed by a
qualified electrician.
UNPACKING
WARNING! Do not operate the tool if any part is missing.
Replace the missing part before operating. Failure to do so
could result in a malfunction and personal injury.
Remove the parts and accessories from the packaging and inspect
for damage.
ASSEMBLY & INSTALLATION
Dashed numbers in parenthesis (Fig. 1-1) refer to a specific
point in an illustration or image.
POSITIONING THE HEATER
Install the heater out of traffic areas and maintain the minimum
clearance required. The direction of the airflow should not be
restricted or obstructed. If installing multiple heaters, ensure
that the units are arranged to promote proper air circulation.
