V1.0
10,000W CONSTRUCTION HEATER
8681330
WITH ENCLOSED MOTOR
Visit www.princessauto.com for more information
7
MOUNTING THE BRACKET
CAUTION! The mounting structure and the anchoring
hardware must be able to support the weight of the heater to
avoid hazardous situations.
1. Locate a stud in the ceiling or
wall joist.
2. Remove the mounting bracket
from the heating unit.
2.1 Loosen the bracket screws
with a wrench.
2.2 Slip the handle off the
screw heads.
3. Mount the bracket to the ceiling or wall joist using the
provided 3/8 in. diagonal lag bolts and flat washers. See
Fig. 2. Use only one bolt and washer set on the centre of
the bracket if the heater will be rotated.
HANGING THE HEATER
1. Lift the heater up and into the mounting bracket.
2. Align the bracket screws with the keyhole slots. Use the
bottom keyhole slot (Fig. 3-1) if the heater will be tilted down.
3. Tighten the bracket screws to secure.
Fig. 1
Fig. 2
