V1.0
10,000W CONSTRUCTION HEATER
8681330
WITH ENCLOSED MOTOR
Visit www.princessauto.com for more information
11
2. Once the room reaches the desired temperature, the unit
will power down. Rotate the knob counterclockwise until
the thermostat clicks off. When the temperature drops, the
heater will power on to maintain the set temperature.
NOTICE! Rotate the thermostat knob slowly so the heating
element starts or stops before the fan. Doing so protects the
heating element from damage.
ADJUSTING AIR FLOW DIRECTION
Loosen the bracket screws to rotate or tilt the heater to the
desired position. Retighten the screws to secure. The heater’s
louvres can be adjusted but are designed to not completely close.
NOTICE! Do not force the louvres to prevent damage to
the heater.
CARE & MAINTENANCE
1. Maintain the tool with care. A tool in good condition is
efficient, easier to control and will have fewer problems.
2. Inspect the tool components periodically. Repair or replace
damaged or worn components. Only use identical
replacement parts when servicing.
3. Only use accessories intended for use with this tool.
4. Maintain the tool’s labels and name plates. These carry
important information. If unreadable or missing, contact
Princess Auto Ltd. for replacements.
WARNING! Only qualified service personnel should repair the
tool. An improperly repaired tool may present a hazard to the
user and/or others.
CLEANING
Wipe the surface with a clean, moist cloth. Do not use solvents.
