• Tachometer Gauge 2 1/16” INCH
• Wiring Harness
• Mounting Cup (Not required for pod installation)
• (2) Neoprene EDPM Grommets
PACKAGE CONTAINS:
FEATURES:
SPEK PERFORMANCE GAUGE TACHOMETER FEATURES:
• INTELLIGENT ELECTRICAL GAUGES.
• GAUGES ARE PROGRAMMED THROUGH COMMAND KEYS ON FACEPLATE.
• STEPPER MOTOR DRIVES THE GAUGE POINTER OVER A 280 DEGREE SWEEP.
• WIDE-ANGLE-DIAL™ HAS A 15% LARGER VIEWING AREA ON A 2
1/16
” GAUGE.
• PROGRAMMABLE 7 COLOR DIAL AND RED POINTER ILLUMINATION.
• OPTIONAL OUTPUT CONTROL MODULE.
INSTALLATION INSTRUCTIONS:
1
DISCONNECT NEGATIVE (-) BATTERY TERMINAL.
2
VARIOUS MOUNTING SOLUTIONS ARE PRESENTED BY PROPARTS,
DASH INSTALLATION: SELECT LOCATION IN THE DASH TO MOUNT GAUGE AND
CUT A 2
1/16
” HOLE. USE A FILE TO INCREASE THE HOLE SIZE IF REQUIRED. BE SURE THERE IS
SUFFICIENT ROOM BEHIND THE HOLE FOR THE METER CASE AND THE CONNECTORS YOU WILL USE.
3
IF A SUITABLE HOLE IN THE FIRE WALL IS NOT AVAILABLE, CUT AN 11/16” HOLE.
4
TWO GROMMETS MUST BE CUT TO PERMIT INSTALLATION OF WIRING HARNESS. (SEE
DIAGRAM 1
)
5
INSTALL INSTALL THE GROMMET AND MOUNTING CUP ON THE WIRING HARNESS AS SHOWN IN
DIAGRAM 1
. GROMMET IS FOR THE HOLE IN THE FIREWALL.
SPEK™ MONITOR AND CONTROL PERFORMANCE GAUGE TACHOMETER
Wiring Installation Instructions for : RPM Tachometer
2
1/16
” Controller
