Programming Instructions for : RPM Tachometer
2
1/16
” Controller
SPEK™ MONITOR AND CONTROL PERFORMANCE GAUGE TACHOMETER
Refer to the “Flow Chart Programming Instructions” while reviewing this guide.
Gauge is field programmable by the operator while installed in the vehicle. This programming is
accessed by pressing the control buttons located on the face or the meter dial,
ONE AT A TIME
.
The “Down” and “Up” buttons move the pointer to a desired setting or controls the faceplate
illumination. The center “Mode” button will save the setting you choose and proceed to the next
level. Pressing the “Mode” and “Up” or “Mode” and “Down” buttons simultaneously and holding
them for 5 seconds in any level will shift you to the Submenu.
DOWN
MODE
UP
+
–
MAIN MENU
NORMAL OPERATION
PEAK PLAYBACK
HIGH RED-LINE SETTING
LOW THRESHOLD SETTING
C
O
L
O
R
S
C
H
E
M
E
DIAL BRIGHTNESS
SUBMENU
OPTION:SELECT PPR
OPTION:RESTORE FACTORY DEFAULT
OPTION: DEMO MODE
OPTION: POINTER BRIGHTNESS
U. S. PATENTS 7,612,660 AND 7,278,749 ADDITIONAL PATENTS PENDING.
