Wiring Installation Instructions for : RPM Tachometer
2
1/16
” Controller
THERE ARE THREE SECTIONS TO THIS MANUAL: WIRING INSTRUCTIONS, PROGRAMMING
INSTRUCTIONS AND FLOW CHART PROGRAMMING INSTRUCTIONS. PLEASE READ EACH
SECTION CAREFULLY BEFORE ATTEMPTING TO INSTALL OR OPERATE THIS PRODUCT.
WARNING:
• ALL INSTRUCTIONS IN THIS MANUAL MUST BE FOLLOWED TO INSURE SAFE INSTALLA-
TION AND OPERATION OF THIS PRODUCT.
• NEVER DISASSEMBLE MODIFY OR TAMPER WITH THIS PRODUCT. THIS COULD CAUSE
DAMAGE AND MAKE THEM UNSAFE TO USE. TAMPERING WITH THE PRODUCT WILL VOID
THE LIMITED WARRANTY.
• INSTALLATION MUST BE PERFORMED BY AN EXPERIENCED AUTOMOTIVE TECHNICIAN.
• INSTALLER MUST USE SAFETY GLASSES.
• DISCONNECT THE NEGATIVE BATTERY TERMINAL BEFORE BEGINNING INSTALLATION.
PROPARTS LLC IS NOT RESPONSIBLE FOR DAMAGE TO ENGINE, VEHICLE OR UNIT CAUSED
BY ELECTRICAL SHORTS.
• DURING INSTALLATION, DO NOT INTERFERE WITH ANY EXISTING CONNECTIONS OR
WIRES.
• ALL ELECTRICAL CONNECTIONS USE SOLDER LESS CONNECTORS AND INSULATE ALL
CONNECTIONS WITH ELECTRICAL TAPE.
• AVOID WIRING NEAR ENGINE, EXHAUST SYSTEM, TURBINE OR ANY AREA THAT MAY RE-
SULT IN DAMAGE.
• DISCONTINUE USE OF THE PRODUCT IF SMOKE OR A STRANGE ODOR IN PRESENT.
CAUTION
• PROPARTS LLC IS NOT RESPONSIBLE FOR INCORRECT INSTALLATION OR PROGRAMMING
OF SPEK™ GAUGES OR CONTROLLERS.
• SPEK™ GAUGES AND CONTROLLERS ARE DESIGNED FOR 12V DC ELECTRICAL SYSTEMS
WITH A NEGATIVE GROUND.
• DO NOT ADJUST THE GAUGES OR GAUGE PROGRAM WHILE DRIVING
• OBEY ALL RULES AND REGULATIONS OF HIGHWAY AND STREET DRIVING.
• INSTALL SENSOR AND WIRE AWAY FROM HIGH HEAT AND / OR VIBRATION AREAS.
• USE CARE WHEN CONNECTING OR DISCONNECTING THE WIRING HARNESS. PULL OUT
EACH CONNECTOR WHILE PRESSING THE LOCK OF THE CONNECTOR FIRMLY.
• IF THE BATTERY TERMINAL IS DISCONNECTED, THE AUDIO, CLOCK AND OTHER MEMORY
DATA MAY BE LOST. THE NECESSARY DATA WILL HAVE TO BE RESET AFTER INSTALLA-
TION.
ProParts, LLC Limited Warranty:
ProParts, LLC warrants all merchandise against defects in factory workmanship and material for 12 months from
date of original purchase. Proof of purchase is required: otherwise the warranty period shall default to 12 months
from date of manufacture as indicated by the date code on the product. This warranty applies to the first retail
purchaser and covers only those products exposed to normal use or service. This warranty excludes items used
for a purpose for which it is not designed, or which has been altered in any way that would be detrimental to the
performance or life of the product or misapplication, misuse, negligence or accident. When it is determined by
ProParts, LLC after examination that a product is defective, ProParts, LLC will repair, replace or issues credit for
any defective product through the original selling dealer or on a direct bases. In no event shall this warranty ex-
