Pronomic Minilift 120, Original Instructions Manual

Page: 68 / 303

________________________________________________________________________________
9 – Minilift 65 / 85 / 120
5.3 Trouble shooting
The lift trolley is designed for safe and efficient operation, provided that routine maintenance is
carried out in accordance with the instructions given. If problems arise, some guidance is provided
below. If the problem persists after action has been taken – Please contact service technician.
If the load carrier does not move at all, or very slowly:

Verify that the maximum load is not exceeded.

Charge the batteries.

Check that the battery charger works. A light should be visible on the charger when plugged
into the mains power.

Check if the fuse inside the power pack needs to be replaced.

Check the battery voltage and replace batteries if the voltage after 8 hours of charging is
less than 25 volts.
If the lift trolley sounds strange:

Make sure the lift trolley is correctly assembled, see section Assembly .

See section Maintenance .
6 Technical specifications
Model Minilift 65 Minilift 85 Minilift 120
Maximum load 65 kg 85 kg 120 kg
Batteries Vented lead batteries
Nominal battery voltage 24 V DC
Mains voltage 230 V AC 50 Hz or 115 V AC 60 Hz
Noise The noise level does not exceed 70 dB(A)
Vibration Vibrations do not exceed 2.5 m/s
2
Test factor for static testing 1.25