32
Setting the Options for Safety Cameras
There are a number of options available when using the safety camera software and these are located under
‘Setup’
, ‘
Safety Cameras
’ in
the navigation mode.
The options available are:
Enabled / Disabled
This will turn the safety camera software on or off. Please note that if this is set to
‘Disabled’
you will not receive any visual or
audible alerts for any safety cameras on your route. Tap the button to change.
Warn At 5 Secs
This will allow you to change the time that you receive the first warning before you reach a safety camera. The options are
‘No Warning’, ‘Warn at 5 Seconds’, ‘Warn at 10 Seconds’
,
‘Warn at 15 Seconds’
and
‘Warn at 20 Seconds’
.
Smart Warnings
When set to ‘ON’ this will warn you about safety cameras on your side of the road only. When set to ‘OFF’ the safety camera
software will warn you about cameras on both sides of the road.
Show on Map
When this is enabled, the safety camera icon
depicting the location of a safety camera will be shown on your map
while you drive. To disable,
please tap the button to select ‘Don’t Show on Map’
Warning Sounds
This will turn the audible alerts on or off. Tapping the button will change it accordingly.
View Info
This will tell you when your subscription is due to expire and the date that your safety camera database was created.
For information on buying safety camera database updates please go to
www.pronav.co.uk
Click OK to return.
If you wish to purchase a one or three camera alerts license with monthly camera database updates, please go to
www.pronav.co.uk
and
select “Online Shop” followed by “Safety Camera Updates”.
