PRONAR T900, Operator'S Manual, Page: 94 / 153

Pronar T900 SECTION 4
4.26
FIGURE 4.6 Grain chute
(1) grain chute, (2) lever, (3) locking screw
4.8 PROPER USE AND MAINTENANCE OF TYRES
•
When working on the tyres, chocks or other objects without sharp edges should
be placed under the wheels of the trailer to prevent it from rolling. Wheels can be
taken off the trailer axle only when the trailer is not loaded.
•
Repair work on the wheels or tyres should be carried out by persons trained and
entitled to do so. This work should be carried out using appropriate tools.
•
Inspect tightness of nuts after the first use of trailer, after the first travel under load
and then every 6 months of use or every 25,000 km. In the event of intensive
work, check the nut tightening at least every 10,000 km. The inspection should be
repeated individually if a wheel has been removed from the wheel axle.
•
Regularly check and maintain correct air pressure in tyres according to Operator's
Manual (especially if trailer is not used for a longer period).