
Pronar T900
SECTION 2
2.10
•
The trailer may only be stood on when the machine is absolutely motionless, the
tractor engine is switched off and the ignition key removed from the ignition.
Tractor and trailer should be immobilized with parking brake and chocks should
be placed under the trailer wheels. Ensure that unauthorised persons do not have
access to the tractor cab.
•
Regularly check the technical condition of the safety devices and correct
tightening of bolt connections (in particular connections of drawbar eye, wheels
and suspension system).
•
Regularly service machine according to schedule defined by Manufacturer.
•
Before beginning repair works on hydraulic or pneumatic systems reduce oil or air
pressure completely.
•
Servicing and repair work should be carried out in line with the general principles
of workplace health and safety. In the event of injury, the wound must be
immediately cleaned and disinfected. In the event of more serious injuries, seek a
doctor's advice.
•
Repair, maintenance and cleaning work should be carried out with the tractor
engine turned off and the ignition key removed. Tractor and trailer should be
immobilized with parking brake and chocks should be placed under the trailer
wheels. Ensure that unauthorised persons do not have access to the tractor cab.
•
Should it be necessary to change individual parts, use only those parts indicated
by the Manufacturer. Non-adherence to these requirements may put the user and
other people's health and life at risk, and also damage the machine and invalidate
the guarantee.
•
Before welding or electrical work, the trailer should be disconnected from the
power supply. The paint coating should be cleaned. Burning paint fumes are
poisonous for people and animals. Welding work should be carried out in a well lit
and well ventilated space.
•
During welding work pay attention to flammable or fusible elements (parts of the
pneumatic, electric and hydraulic systems, plastic parts). If there is a risk that they
will catch fire or be damaged, they should be removed or covered with non-
Summary of Contents for T900
