PRONAR T900, Operator'S Manual, Page: 144 / 153

Pronar T900 WALL EXTENSION INSTALLATION MANUAL
A.2
A.1 INSTALLATION SEQUENCE
Carefully read this manual before installing the wall extensions. The persons who install the
wall extensions should have sufficient know-how, appropriate technology and qualifications
for this type of work.
ATTENTION
Exercise due caution while installing the wall extensions. Make certain that all safety
conditions are adhered to.
During installation work, the tractor and the trailer must be protected against
unintentional movement.
Installation and dismounting of wall extensions should be carried out with the use of
appropriate platforms, ladders or when standing on a ramp. These tools must be in good
condition to fully protect the persons working on them against falling. The installation
work should be performed by at least two persons. Exercise due caution
Installation sequence for the set of wall extensions (400) or (400+100):
1. check completeness according to figures and tables A1-A3,
2. mark the installation holes after fitting the wall extensions,
3. make the holes in the load box during installation,
4. install the left wall extension (item 2- figure A.1). Assume the dotted line as the
base line. Make the first hole at the distance of 39mm (detail K– figure A.1),
5. install the side profile (item 8-figure A.1),
6. install the side wall extension, left +100 (item 29-figure A.1) – only (400+100),
7. install the front wall extension (item 1 - figure A.1),
8. install the front profile (item 12 - figure A.1),
9. install the front wall ext100 (item 28 - figure A.2) – only (400+100),
10. install the left wall extension, rear (item 10 - figure A.1) or the left wall extension,
rear + 100 (item 31 - figure A.1),
11. install the gate wall extension, left (item 4 - figure A.1),
12. install the gate profile, side (item 13 - figure A.1),