PRONAR T900, Operator'S Manual, Page: 35 / 153

SECTION 2 Pronar T900
2.11
flammable material before commencing welding work. Before beginning work,
prepare a CO
2
or foam extinguisher.
•
In the event of work requiring the trailer to be raised, use properly certified
hydraulic or mechanical lifts for this purpose. After lifting the machine, stable and
durable supports must also be used. Work must not be carried out under a trailer,
which has only been raised with a lift or jack.
•
The trailer must not be supported using fragile elements (bricks or concrete
blocks).
•
After completing work associated with lubrication, remove excess oil or grease.
The trailer should be kept clean and tidy.
•
Do NOT make independent repairs of control valve, brake cylinders, tipping
cylinder and braking force regulator. In the event of damage to these elements,
repair should be entrusted to authorised service point or elements should be
replaced with new ones.
•
Do NOT install additional appliances or fittings not according to the specifications
defined by the Manufacturer.
•
Do NOT make repairs to drawbar eye (straightening, repairing or welding).
Damaged drawbar eye should be replaced.
2.2 RESIDUAL RISK
Pronar Sp. z o. o. in Narew has made every effort to eliminate the risk of accidents. There is,
however, a certain residual risk, which could lead to an accident, and this is connected
mainly with the actions described below:
•
using the trailer for purposes other than those for which it is intended,
•
being between the tractor and the trailer while the engine is running and when the
machine is being hitched,
•
being on the machine during work,
•
not maintaining safe distance during loading or unloading of trailer,
•
operation of the trailer by persons under the influence of alcohol,