Pronar T683P
CHAPTER 4
4.26
DANGER
Tilting of the load box may only be performed on firm and level ground.
Only original pins with a handle should be used. The use of non-original pins may damage
the trailer. Tipping pins must be properly locked.
When opening wall closures and locks, be extremely cautious due to pressing the load on
the walls.
4.6.1 UNLOADING OF CARGO TRANSPORTED ON PALLETS
The trailer is unloaded in the following order:
The tractor and trailer should be positioned to drive straight ahead on flat and
hard ground,
Block the tractor and trailer with parking brake,
FIGURE 4.6.
Opening portal walls (left side)
(1) the front portal wall, (2) the rear portal wall, (3) central pillar
Roll up the tarpaulin and place it in the holders provided for this purpose,
Make sure that the load does not tip over and rests against the walls of the
load box,
open the portal walls (1) and (2) - figure (4.6),
Summary of Contents for T683P
