PRONAR T683P, User Manual

Page: 34 / 138

Pronar T683P CHAPTER 2
2.10
2.1.7 TIRES
•
When working with tires, the trailer should be immobilized with the parking brake
and secured against rolling by placing wedges under the wheels. The wheel can
be dismantled only when the trailer is not loaded.
•
Repair work on wheels or tires should be carried out by persons trained and
authorized to do so. These works should be carried out using appropriately
selected tools.
•
Checking the tightening of the wheel nuts should be carried out after the first use
of the trailer, every 2-3 hours during the first month of using the machine and then
every 30 hours of driving. Each time, repeat all operations if the wheel was
disassembled. Wheel nuts should be tightened in accordance with the
recommendations contained in the 5 MAINTENANCE chapter.
•
Avoid damaged road surfaces, sudden and variable manoeuvres, and high
speeds when turning.
•
Check tire pressure regularly. Tire pressure should also be checked during all-day
intensive work. It should be taken into account that an increase in tire temperature
can increase the pressure by up to 1 bar. With such a rise in temperature and
pressure, reduce the load or speed. Never reduce pressure by venting if it
increases due to temperature.
•
Tire valves should be protected with suitable caps to avoid penetration of dirt.
2.1.8 TECHNICAL SUPPORT
•
During the warranty period, any repairs may only be carried out by a Warranty
Service authorized by the manufacturer. After the end of the warranty period, it is
recommended that any repairs to the trailer be carried out by specialized
workshops.
•
In the event of any faults or damage, the trailer should be decommissioned until
repaired.
•
During maintenance work, use appropriate, close-fitting protective clothing,
gloves, shoes, glasses and the right tools.