PRONAR T683P, User Manual

Page: 128 / 138

Pronar T683P CHAPTER 5
5.34
5.7.2 LUBRICANTS
For heavily loaded parts, it is recommended to use lithium grease with the addition of
molybdenum disulphide (MOS
2
) or graphite. For less loaded components, it is recommended
to use general-purpose machine greases that contain anti-corrosive additives and are highly
resistant to water washout. Aerosol preparations (silicone greases, anti-corrosive lubricants)
should have similar properties.
Before using lubricants, read the information leaflet for the selected product. Particularly
important are safety rules and how to handle a given lubricant and how to dispose of waste
(used containers, contaminated rags, etc.). The information leaflet (product card) should be
kept together with the grease.
5.8 CLEANING THE TRAILER
The trailer should be cleaned depending on demand and before a longer standstill (e.g.
before winter). The use of a pressure washer obliges the user to become familiar with the
principle of operation and recommendations for the safe operation of this device.
Guidelines for cleaning the trailer
•
Before washing the trailer, open the tailgate and the front extension. Thoroughly
clean the load box from the remains of the load (sweep it or blow it with
compressed air), especially in the chain guides.
•
To clean the trailer, use only clean running water or water with a cleaning
detergent additive with a neutral pH.
•
The use of pressure washers increases the effectiveness of washing, but be
careful when working. During washing, the nozzle of the cleaning aggregate must
not be closer than 50 cm from the surface being cleaned.
•
The water temperature should not exceed 55 ° C.
•
Do not direct the water jet directly at the elements of the installation and
equipment of the trailer, i.e. control valve, braking force regulator, brake cylinders,
hydraulic cylinders, pneumatic, electric and hydraulic plugs, lights, electrical
connectors, information and warning stickers, rating plate, cable connectors,