PRONAR T683P, User Manual

Page: 85 / 138

CHAPTER 4 Pronar T683P
4.23
Lever (1) - figure (4.4) is used to unlock the bolts of the right and left
front side walls.
set the control lever for the hydraulic tipping system circuits to position 1 -
tipping the first trailer,
using the divider lever in the driver's cab cause the load box to tilt,
Unload the load by tilting the load box using a hydraulic cylinder. It is forbidden
to start and jerking forward or backward with the load box raised,
after unloading, lower the load box to the very end, clean the edges of the
floor and walls,
close and secure walls, extensions and a chute window,
before moving off make sure that the tipping pins are secured with cotter pins.
CAUTION
It is not recommended to unload the load box with the use of opening the walls
downwards (with the bottom locks of the box locked). The load pressing against the walls
may injure the user or damage the trailer.
Incorrectly locked and secured pins may cause damage to the trailer.
ADVICE
In order to additionally secure the trailer during unloading, it is recommended to use
wheel chocks. In the event of unloading bulky materials, e.g. branches, it is allowed to
open the rear wall of the trailer downwards. During the unloading, the help of another
person is recommended.
If the second trailer is hitched, it should be unloaded only when the load box of the first trailer
has been lowered and the hydraulic tipping system control valve is set to position 2 - tipping
of the second trailer.