PRONAR T683P, User Manual

Page: 122 / 138

Pronar T683P CHAPTER 5
5.28
Check the correct installation of the triangular plate holder for slow moving
vehicles.
Before travelling on a public road, make sure that the tractor has a reflective
warning triangle.
Electrical system check:
•
each time when connecting the trailer.
ADVICE
Before travelling, make sure that all lamps and reflectors are clean.
5.6 LUBRICATION OF THE TRAILER
The trailer should be lubricated with a hand or foot grease gun, filled with the recommended
lubricant. If possible, remove old grease and other contaminants before starting work. After
finishing work, wipe off excess grease.
Parts that should be lubricated using machine oil should be wiped with a dry clean cloth and
then applied to the lubricated surfaces with a small amount of oil (oiler or brush). Wipe off
excess oil.
The replacement of grease in wheel hub bearings should be entrusted to specialized service
points equipped with the appropriate tools. According to the axle manufacturer's
recommendations, the entire hub must be disassembled, the bearings and individual sealing
rings removed. After thorough cleaning and inspection, install lubricated components. If
necessary, bearings and seals should be replaced. Lubrication of axle bearings should be
carried out at least once every 2 years or after covering 50,000 km. In the event of intensive
use, this should be done more often.
Empty containers of grease or oil should be disposed of in accordance with the lubricant
manufacturer's instructions.