PRONAR T679, Operator'S Manual, Page: 127 / 135

SECTION 5 Pronar T679
5.37
FIGURE 5.13 Bolt with metric thread
(1) strength class, (d) thread diameter
Hydraulic conduits should be tightened using torque of 50 – 70 Nm.
5.11 INSTALLATION AND DISASSEMBLY OF THE FRAME
AND TARPAULIN COVER
Tarpaulin cover can only be used together with the frame. The assembly of wall extensions
should be carried out with the use of appropriate platforms, ladders, ramps or other stable
raised surfaces. Particular care should be taken, holding onto the trailer with one hand. Work
should be done with the help of another person
The frame structure comprises front apex (1), centre apex (2), rear apex (3), as well as
connecting pipe (4) – figure (5.14).
Assembly of frame and tarpaulin
Attach front apex (1) to the front wall extension.
Attach rear apex (3) to the rear wall extension.
Attach centre apex (2) to lateral wall extensions.
Screw the connecting pipe (4) to the front and centre apexes
Install limiters (5) to side wall extensions on the right side of the load box.