PROMULTIS Totem Focus, Instruction Manual

Page: 5 / 30

3
Important Safety Precautions
(Continued)
15.Careful move ---When a trolley is used, be c when moving the trolley/apparatus combination to avoid
injury from the product tipping over. Sudden stops, excessive force and uneven floor surfaces can cause the
product to fall from the trolley.
Never attempt to move the totem unless the AC Power cord has been disconnected.
16. Lightning ---Unplug this apparatus during a thunder storm or when unused for long periods of time.
17. —
Do not use immediately after moving from a low temperature to high temperature environment, as this causes
condensation, which may result in fire, electric shock, or other hazards.
18.Clean only with dry cloth ---Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners
or aerosol cleaners. Use a soft cloth for cleaning.
19.Ventilation ---Do not block any ventilation openings. Install the in accordance with the manufacturer
instructions. The vents and other openings in the cabinet are designed for ventilation. Do not cover or block
these vents and openings since insufficient ventilation can cause overheating and shorten the life of the product.
20.Panel protection ---The display panel used in this product is made of glass. Therefore, it can break when the
product is dropped or impacted upon by other objects. Be careful not to be injured by broken glass pieces in case
the display panel breaks.
21.Pixel defect ---The display panel is a very high technology product, giving you finely detailed pictures.
Occasionally, a few non-active pixels may appear on the screen as a fixed point of blue, green or red. Please
note that this does not affect the performance of your product.
WARNING: For continued safety, apparatus with class I construction shall be connected to a mains socket outlet
with a protective earthing connection.
autious
About location / environment Do not use in hot and cold rooms (locations).
!
When the unit is used in rooms (locations) with low temperature, the picture may leave trails or appear slightly
delayed. This is not a malfunction, and the unit will recover when the temperature returns to normal.
!
Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct
sunlight or near a heater, or in high humidity, as this may cause the cabinet to deform and the screen to
malfunction, and affect the totem’s performance .
!
!
totem
Environment condition:
Operating temperature: 5°C – 35°C
Operating humidity: 20 – 80 % ( no moisture condensation )
Storage temperature: -15°C – 45°C
Storage humidity: 10 – 80 %
Atmospheric pressure: 86 kPa ~106 kPa
Environmental Protection
Waste electrical products should not be disposed of with
household waste. Please recycle where facilities exist. Check
with your Local Authority or retailer for recycling advice.