PROMULTIS Totem Focus, Instruction Manual

Page: 7 / 30

Identification of Controls
5
2
3
4
5
6
3
1
AUDIO
TOUCH
OUT 2
2 8 9
10
11
12
6 7
HDMI 1
(MHL)
HDMI 2
(ARC)
VGA 1
P
C I
N 1
VGA 2
P
C I
N 2
DP IN
USB 2.0
TOUCH
OUT 1
1.VGA OUT
The currently selected PC IN 1/2/3 signal
output.
2.PC IN1/2/3
Enable connection to PC or other external
devices with VGA/AUDIO ports.
3.USB2.0/3.0
Connect USB devices to these ports.
4.HDMI1/2 Input
To connect with those equipments with
HDMI or DVI interface.
HDMI1(MHL): Connect an MHL - enabled
device such as a cell phone to this jack to
view the external device’s screen on your
totem.
HDMI2(ARC): Connect an ARC-enabled
home theater receiver to this jack.
5. DP(DisplayPort) Input
Connect an external device to DP out
jack.
6.TOUCH1/2 OUT
Output the touch for external devices
connected to PCx or HDMIx port which
support touch system.
Note : TOUCH OUT 2 takes precedence
over TOUCH OUT 1 in default. You can
define it to in Lock menu.
7.RS232
For service, RS232 control and the other
uses.
8.WAN IN
The built-in router input port. Connect to
the external network.
9.LAN OUT
The built-in router output port. Connection
to another computer or other Internet
enabled devices.
10.AV IN
Connect an AV device to this jack.
11.S/PDIF digital audio output
Connect a digital sound system to this
jack.
12.
Connect headphones to this jack. The
totem is the current audio output.
Main board
OPS
‰
‚
ƒ
„
†
‡
ˆ

Power Indicator
fixed disk Indicator


.
The OPS WIFI port for receiving network signal.
‚
. (DisplayPort)
Enable connection to a monitor or other external devices with
DisplayPort.
ƒ
. HDMI Output
Enable connection to a monitor or other external devices with
HDMI input port.
„
. VGA OUT
Enable connection to a monitor or other external devices with
VGA input port.
.
Connect headphones to this jack. Audio output of the OPS.
†
.
The anti-theft lock groove.
‡
. MIC
The microphone input of the OPS.
ˆ
. LAN IN
Enable connection to cable and log on to Internet access via
Cable.
‰
. USB2.0/3.0
USB standard interface
,
enable connection to USB2.0,
USB3.0 standard devices
.
Connecting, please select the
appropriate port.
OPS
Main
board