Menu List
21
Source Auto Switch
Select
On
to automatically recognition source.
Setting
Color Range
Display Date and Time.
Date / Time
Set Off timer to switch the totem to standby at a specified time.
Off Timer
Set On timer to turn on the totem automatically to source at a
certain time.
On Timer
Set the duration of time until the totem automatically goes into
Standby mode.
[Off] / [10 Minutes] / [20 Minutes] / [30 Minutes] / [60
Minutes] / [90 Minutes] / [120 Minutes] / [180 Minutes] / [240
Minutes]
.
Sleep Time
Menu Timeout
Select OSD menu display time.
Movie Mode
Turn on/off the movie mode.
HDMI_ARC
MHL Auto Switch
The default password is 0000.
Lock
Lock System
Float Menu
Turn on/off the float menu display.
Select
Off
to in the
Lock System
menu to unlock it.
Select
Lock Touch
to disable the function of the touch panel.
Set Password
Password settings.
Change Logo
Set logo
Note:
Before setting the logo, save the logo picture (should be
“JPEG” format and size <512KByte) you want to use on root
of USB disk and named “boot0.jpg”. Insert the USB disk into
the USB port on the Android board.
Power on Source
Power on Source Setting, in
MEMORY
mode, when the totem
powered on, it will automatically switch to the source when it
powered off last time. otherwise, it is in setting mode.
Restore To Default
Reset all settings to factory defaults.
Select
On
to turn on enable HDMI_ARC.
Select
On
to automatically switch to the MHL input when it
connected.
Select color range. (Only for HDMI mode)
TouchOut is there to define which touch
signal
output belong to
which
input. E.g. If TouchOut1 is set to VGA1 it means the touch
signal output from
TouchOut1 belongs to the input from VGA1.
When both ports are connected TouchOut2 has priority by default.
TouchOut1 To
TouchOut2 To
Adjusting Setting menu
Adjusting Lock menu
Wake up by gesture
Select
On
to enable t
wo or more fingers touch the bottom of
the screen and drag upward to turn on the totem when the
totem is in standby mode.
Power on Volume
Power on Volume Setting.
In
Menory
mode, when the totem powered on, volume will same
as the power off.
In
Settings
mode, every time the totem turns on, volume is the
value of this setting.
Volume Settings
InputLabel
Select the input source you want to label.
Source
Label
Reset
Edit
the
label
of
the
selected
input
source.
Reset
labels
to
defaults.
F.M Auto Off
Enable
the
float
menu
auto
off
if
there
is
no
activity
for 15 secs
or
not
.
Summary of Contents for Totem Focus
Page 30: ...PRINTED ON RECYCLED PAPER ...
