PROMULTIS Totem Focus, Instruction Manual

Page: 9 / 30

7
Installing remote control Batteries
Battery precautions:
Improper use of batteries can result in a leakage of chemicals and/or
explosion. Be sure to follow the instructions below.
·
Place batteries with their terminals corresponding to the (+) and (–)
indications.
·
Different types of batteries have different characteristics. Do not mix
batteries of different types.
·
Do not mix old and new batteries. Mixing old and new batteries can shorten
the life of new batteries and/or cause old batteries to leak chemicals.
·
Remove batteries as soon as they are non-operable. Chemicals that leak
from batteries can cause a rash. If chemical leakage is found, wipe with a
cloth.
·
Dispose of batteries in a proper manner.
·
If the remote control is not used for an extended period of time, remove the
batteries.
·
The batteries shall not be exposed to excessive heat such as sunshine, fire
or the like.
Open the battery cover.
1
Insert two AAA batteries into the battery compartment. Make sure that the
+ and – symbols on the batteries match the + and – symbols in the battery
compartment.
2
Replace the cover.
3
To install remote control batteries:
Aiming the remote control
Use the remote control by pointing it towards the remote sensor on the front
of your totem. Objects between the remote control and the remote sensor
may prevent proper operation.
Cautions regarding use of remote control
·
Do not expose the remote control to shock. In addition, do not expose the
remote control to liquids, and do not place in an area with high humidity.
·
Do not install or place the remote control under direct sunlight. The heat may
cause deformation of the unit.
·
The remote control may not work properly if the remote sensor window of
the main unit is under direct sunlight or strong lighting. In such a case,
change the angle of the lighting or the totem set, or operate the remote
control closer to the remote sensor window.
7
Remote Control