Promise VSky H3970hDM Product Manual Download

Page: 59 / 121

BIOS

bios s

etup

tility

This section describes the BIOS Setup Utility options. You can run BIOS Setup with or without an operating

system being present. Onboard devices are configured with the BIOS Setup utility that is embedded in flash

ROM.

The configuration utilities allow you to modify the CMOS RAM and NVRAM. The actual hardware configuration

is accomplished by the BIOS POST routines and the BIOS Plug-N-Play auto-configuration manager. The

configuration utilities update a checksum for both areas, so potential data corruption is detected by the BIOS

before the hardware configuration is saved. If the data is corrupted, the BIOS requests that the user reconfigure

the system and reboot.

Note

In following table, Settings in bold are BIOS Setup Defaults.

Note

Because the BIOS code is the most often changed part of the motherboard design,
the BIOS information described in this section may be a little different compared to
the actual BIOS that contained in your motherboard.

VSky H3970 Product Manual

Promise Technology, Inc.

Summary of Contents for VSky H3970hDM

























































































































Search results

Summary of Contents for VSky H3970hDM

Reviews:

Related manuals for VSky H3970hDM

Brands by name

Popular brands

Promise VSky H3970hDM, Product Manual

Search results

Summary of Contents for VSky H3970hDM

Reviews:

Related manuals for VSky H3970hDM

Brands by name

Popular brands