5
Chapter 2: Installation
•
Unpack your SuperSwap 1600 (below)
•
Install the Enclosure (page 6)
•
Install a Disk Drive (page 11)
•
Remove a Disk Drive (page 17)
•
View SuperSwap in WebPAM (page 18)
Unpack your SuperSwap 1600
The SuperSwap 1600 box contains the following items:
There are two phases to install the SuperSwap 1600 into your computer:
•
Install the enclosure in your computer chassis
•
Install a disk drive in the drive carrier
•
SuperSwap Drive Enclosure
•
Drive Carrier
•
Quick Start Guide
•
3-pin to 3-pin SMBus Cable
(SATA II compliant)
•
6-pin to 6-pin Daisy Chain Cable
•
(4) Screws to attach a 3.5-inch
disk drive to the drive carrier
•
(8) Screws to mount Enclosure
into PC chassis
•
(2) Keys
•
Product CD with
User Manual
Warning
SuperSwap 1600, like other parts of your system, is subject to
damage by static electricity. Be sure that you are properly
grounded (Promise recommends that you wear an anti-static strap
or touch a grounded object) and that you unplug your system
before installing SuperSwap 1600 or handling its components.
Caution
The SuperSwap 1600 ships with the drive carrier locked inside the
enclosure. Use the key to unlock the enclosure before you attempt
to slide out the drive carrier for the first time.
