SuperSwap 1600 User Manual
8
8.
Connect a SATA or SAS data cable from your SATA or SAS Controller card
to the data connector on the SuperSwap enclosure.
Promise recommends connecting the data cables in Port number order. For
example, Port 1 on the FastTrak controller card connects to the top
SuperSwap enclosure. Port 2 connects to the second enclosure, and so on,
as shown above.
This arrangement makes it easy to remember which drive is on which
channel when you replace or reassign the drives.
9.
Connect the 3-to-3 pin SMBus cable from the Management connector on the
FastTrak or SuperTrak Controller card to the Management connector on the
back of the housing assembly.
FASTTRAK SX4300
SuperSwap 1
Port 4
Port 3
Port 2
Port 1
Serial ATA
Cable
FastTrak SX4300
Controller Card
SuperSwap 2
SuperSwap 3
Data Connector
Data Connector
Data Connector
SMBus Cable
