![background image](http://html.mh-extra.com/html/promise-technology/vess-a3340d/vess-a3340d_quick-start-manual_1617254011.webp)
I
nstAll
the
slIdIng
rAIls
And
plAce
devIce
In
rAck
Follow these steps to install the sliding rails in the rack system, then place the Vess
A3340s/A3340d onto the rails and secure the device to the rack.
1.
Determine what height to place the 2U enclosure
in the rack, then place the right and left rack rails
at the same height on in the right and left rack
position. Choose the mounting holes accordingly
for your rack system. Note that three holes are
required on each front post, the uppermost of the
three to be used for the flange nuts to anchor the
enclosure to the rack posts. Adjust the length of
the mounting rails as needed.
Notice that each end of the sliding rails have a lever
to operate the lock mechanism that grips the rack
post.
Promise Technology
2
Quick Installation Guide
Lock release lever (back left)
Determine which holes to use on rack