F
ront
P
AneL
Led
s
When boot-up is finished, check the LEDs on the front panel to make sure the system
is functioning properly.
LED Description
Power
Lights BLUE to indicate the system is powered on.
System Status
Lights GREEN when healthy, RED if there is a critical
problem (LD offline, fan malfunction, voltage out of range,
system temperature alert), remains dark when not ready.
Fan Status
Lights GREEN when healthy, RED indicates a fan in the
System module is not operating in normal range, ORANGE
indicates the CPU fan module is not present.
Recording
RED indicates application running.
Network
Link/Activity
One LED for each 1000BASE-T LAN port. Lights BLUE to
indicate a valid link, blinks BLUE to indicate activity on the
port.
Global RAID Status
Lights GREEN when healthy or RED if any RAID volume is
offline, ORANGE for critical state of any logical drive.
Global HDD Activity
Blinks BLUE to indicate one or more drives are being
accessed, remains dark when no drives are being
accessed.
HDD Status
Lights GREEN when healthy, RED if the RAID member is
offline or there is a physical disk error, ORANGE indicates
the drive is rebuilding, and a dark LED indicates either no
drive is installed or the drive is not configured.
OPAS USB
Lights GREEN if an OPAS device (USB disk) is detected,
RED if the OPAS operation has failed, blinks GREEN when
an OPAS operation is in progress.
LED indicators on front of Vess A3340s/A3340d
Power
System
Status
Fan
Recording
Network Link/Act
HDD Activity
Global RAID
OPAS USB
HDD Status
Promise Technology
2
Quick Installation Guide