![background image](http://html.mh-extra.com/html/promise-technology/pegasus2-r2/pegasus2-r2_product-manual_1617244031.webp)
7. It takes a few seconds for the utility software to be installed. When the installation has completed,
a message informs you that the installation was successful. Click
Close
to end the installation
procedure.
The PROMISE Utility is now available to be used for management of the Pegasus2 R2+. Use this if you
need to change a hard disk drive, or change the default RAID configuration, or to update the device
firmware. This is also useful for monitoring the status of the system and for troubleshooting.
22
Pegasus2 R2+ Product Manual