manualshive.com logo in svg

Promise Technology Pegasus R4i, Product Manual, Page: 27 / 163

Share
Download
Promise Technology Pegasus R4i Product Manual Download Page 27

16

Promise 

Technology 

   

   

 

Pegasus R4i

To Create a Disk Array and Logical Drive

The Pegasus R4i is shipped with HDDs pre-installed and a RAID5 array configured, so it is not 

necessary to do this yourself. However, if you want to change the disk drives or configure a different 

RAID, you will need to create an array and logical drive to use the storage.

If you are installing new disk drives, use the Wizard to create a disk array and logical drive. The 

procedures are described in the next chapter.

To see the 

Wizard

 menu, launch the Pegasus Utility, in the 

Dashboard

 menu, under 

System Status

, 

click the Disk Array link. See “Perusing the Promise Utility interface” on page 19 for an overview of 

the Pegasus Utility interface.

The Wizard dialog box opens with three configuration methods.

Wizard dialog box

Choose the best method for your situation. See the table below.

Method

User options

Suggested for users who are

See

Automatic

None

New to data storage

page 79

Advanced

Individual parameters

Data storage professionals

page 80

Summary of Contents for Pegasus R4i




































































































































































Reviews:

No comments