manualshive.com logo in svg

Promise Technology Pegasus R4i, Product Manual, Page: 111 / 163

Share
Download
Promise Technology Pegasus R4i Product Manual Download Page 111

100

Promise 

Technology 

   

   

 

Pegasus R4i 

Drive Status LEDs

Activity LEDs

Formatting Your Logical Drives

If you left the 

Format 

box checked when you created your logical drives, they are formatted 

automatically.

If you UNchecked the 

Format 

box, you must format your logical drives manually.  

See “Formatting Your Logical Drives” on page 100.

 

When the Pegasus Utility has finished the format operation, new removable-drive 

icons, each representing one logical drive, appear on your desktop. 

When you see the icon, your logical drive is ready to use. Your logical drives are 

ready to use.

Locating a Logical Drive

This feature causes the drive module LEDs to flash for one minute to assist you in locating the physical 

drives that make up this logical drive.

To locate a logical drive:

1.  Click the 

Storage 

tab.

2.  Click the 

Logical Drive 

icon. 

The list of logical drives appears.

3.  Mouse-over the logical drive you want then click the 

Locate 

button. 

The Drive Power / Status LEDs for the physical drives that make up the logical drive blink blue 

and orange for one minute.

Running the Locate function to identify a disk array

Drive Power / Status LEDs blink blue and orange

Summary of Contents for Pegasus R4i




































































































































































Reviews:

No comments