Chapter 3: Configuration
39
UNIX/Linux (NFS) Servers
The UNIX (NFS) selection is used to either configure or view the Export IP address and Host
Name settings for UNIX or Linux-based network server(s) if used as the operating system.
From the main Configuration Menu displays the following choices:
Current Settings:
allows users to view previously-configured settings for Export IP
address and Host Name of UNIX/Linux server(s) with access to ConnectStor II
Create:
permits the supervisor to designate new or additional Export IP address and Host
Name of network UNIX/Linux server(s) so attached UNIX/Linux clients can access data
and storage capacity contained on the ConnectStor II unit
Delete:
permits the supervisor to delete one or all Export IP addresses of UNIX/Linux
servers able to access the ConnectStor II unit
Viewing Current Servers
Clicking on Current Settings from the UNIX (NFS) submenu selection will display the
following table in the main information panel:
The table shows the designated Export IP address of the UNIX or Linux-based server and its
Host Name.
These settings cannot be changed. You must create a new one (see the next page). Delete the
old setting if you want to stop access by that particular UNIX/Linux server.