ConnectStor II User Manual
16
Logging In
1.
From any Internet-connected Windows or Linux computer, open your browser of choice
(Internet Explorer v.5.0 or later, or Netscape Navigator 4.0 or later).
2.
In the address bar of your browser, input the following:
http://x.x.x.x/admin/
where x.x.x.x is the IP address assigned to ConnectStor II as described in the previous
chapter
3.
Press the
Enter
key.
NOTE
: Remember multiple ConnectStor II units may exist on a
single LAN. Make sure you are using the correct IP address of
the ConnectStor II unit that you wish to configure.
4.
Once the ConnectStor II unit corresponding to the IP address is found, the following
login screen should appear in your browser:
5.
The default User Name
supervisor
will appear in the name field. Enter the correct
password in the password field. The default administrative password is
password
.
6.
Click the
Login
button to enter or
Reset
button to cancel.
CAUTION
: Because the ConnectStor II's password default is the same for all
units, Promise recommends that the supervisor change the password as soon
as possible after installation. See Modifying User Information on page 31 for
instructions.
NOTE
: For future reference, the version number above the User Name field is
the firmware version number of your ConnectStor II unit.
