1
About the product
OZONFILT
®
OZVb ozone generation systems are designed as
pressurised systems, in which air as the operating gas is fed into
the ozone generator under pressure.
The ozone is generated using medium-frequency high voltage and
is controlled by the primary current. The introduction of the elec‐
tronic power unit, developed in-house by ProMinent, provides
extensive protection for the electrical components (high voltage
transformer and power stage) and also permits the correct digital
display of the ozone output in "grammes/hour".
As a result, any required ozone volume between 3 and 100% of
the nominal output can be set reproducibly, and largely independ‐
ently of voltage and pressure fluctuations.
The use of an integrated pressure swing dryer and a dielectric with
optimum thermal conductivity makes the system extremely com‐
pact.
The unique construction of the generator ensures outstanding
cooling performance with low cooling water consumption and
removes the heat produced quickly before the ozone produced can
decompose due to excessive heat. Operation under pressure
means that the ozone generated can be introduced directly into
water systems with back pressures of up to 4 bar.
Additional booster pumps and injectors can therefore be dispensed
with in many applications.
The integral data logger (optional) writes data to an SD card where
it is stored. A ProMinent application is used to visualise the meas‐
ured values on a PC.
About the product
6