10
Operation
Switch the system on by turning the master switch to "1".
10.1 Displays, structure
The system “wakes up” in the continuous display:
Gas
H
2
O
O
3
1.27 bar (over)
504 l/h
19 l/h
16.5 °C
OZVb
OFF
08:05:53
EXPERT
2
1
100%
int
9.60 g/h
B1048
1
2
3
4
5
6
7
8
9
Fig. 7: Continuous display OZVb
1
[Menu] key: access to the menus
2 Designation of the system
3 Status bar (display of system statuses, such as: On, Off,
Pause, Power setback, Faults)
4 Time
5 Display of the current access levels – if needed
6
[ALARM] key / display
7
[START] or [STOP] key
8 Process image (ozone setpoint set-up, display of measured
values and valve statuses)
9 “Login” symbol
You can use the continuous display to:
n
move to the menu,
n
read various messages from the controller,
n
input the setpoint for ozone,
n
read off various measured system variables,
n
view different system statuses,
n
start or stop the entire system,
n
open the error message history.
If the "Login" symbol (9) is displayed, then a "User name" and a
"Password" are needed to move to the next display. To do so, click
on the “Login” symbol (9).
The “Login” symbol (9) is visible filled if no one is logged in. Press
the “Login” symbol to move to the next display. Then enter your
correct “User name” and “Password” - the “Login” symbol (9)
appears empty.
Further information is provided by
on the touch panel’ on page 59.
Continuous display
Login
Further information
Operation
46