75
promesstec GmbH
I Niedersachsenstraße 4 I D- 48465 Schüttorf I Tel.:+49 (0)5923/ 90 229 0 I Fax:+49 (0)5923/ 90 229 29
E-Mail: [email protected] I Internet: www.promesstec.com
Note: Please refer section “Auto Output” for more details about options available
Note
:
In the mode the sampling rate of the recorder is fixed at 100 milli seconds by
the hardware, i.e. 10 samples are collected per second. If the logging speed
is set at 1 second in Instant mode, the recorder logs using the last of ten
measured data values. For the same speed in Average mode, the recorder
logs using the average of the Ten measured data values. For the same speed
in the Maximum or Minimum mode, then the recorder logs using the maximum
or minimum of the Ten measured data values.
Sampling
Logging
(historical
trend)
Display (real time)
Instant
100mS the last of 10
measured data
the last of 10 measured
data
Averaged
100mS the average of
10 measured data
the last of 10 measured
data
Maximum
100mS the maximum of
10 measured data
the last of 10 measured
data
Minimum
100mS the minimum of
10 measured data
the last of 10 measured
data
Press “
Home
” key to return to real-time display, all configurations will be memo-
rized
◆
The Digital output DO card with relay can be set in Job1, Job2. It can be
traced in System Info mode after installed into the Slot.
