![promesstec PPR 500 User Manual Download Page 123](http://html1.mh-extra.com/html/promesstec/ppr-500/ppr-500_user-manual_1616631123.webp)
123
promesstec GmbH
I Niedersachsenstraße 4 I D- 48465 Schüttorf I Tel.:+49 (0)5923/ 90 229 0 I Fax:+49 (0)5923/ 90 229 29
E-Mail: [email protected] I Internet: www.promesstec.com
8.2.4 How to configure Communication Bank
It is to set path for the data transfer. It’s important to setup “Bank” properly at the firsthand
to proceed further
1. Open existing Project or create a new project from RealTime viewer using
one of the following options
Start-Programs-Data Acquisition Studio-Realtime Viewer
Click on new Project as shown in square icon in the above figure
Then the User has give name to the project as shown in the below figure