October 2014
Page
71
►
Voltage Cursor measurement
Press
CURSOR
to activate
CURS MEAS
menu.
Press F1 to select Voltage and Type, there are two purple horizontal
lines appeared on the screen, representing CURSOR 1(on the top) and
CURSOR2 (on the bottom).
Press
F2
to select
CH1
as the
Source
. The results are shown on the
screen. (see Fig. 66).
Figure 66.
Waveform of Voltage Cursor Measurement.
►
Time Cursor measurement
Press
CURSOR
to activate
CURS MEAS
menu.
Press
F1
to select
Time
and Type, there are two purple vertical lines
appeared on the screen, representing CURSOR 1(on the left) and
CURSOR2 (on the right).
Press
F2
to select
CH1
as the
Source
.
Move CURSOR1 and CURSOR2 and the results change accordingly as in
Fig. Fig. 67.
