24
TMBA_B-BAPS-e-2010
8.6 Using the optional equipment WIFI interface YMI-A01 (TMBA-A02-A)
If the WIFI is not setup yet, the device will create a WIFI access point once powered up. Use
your computer to connect to this access point.
The SSID is “AI_THINKER_xxxxxx”
Use a web browser to visit the webpage
In the webpage:
A: Set the mode to apsta
B: Enter the network and password to connect.
C: Save the setting and reboot.
D: Disconnect the AP from the computer. Reset power of the MBA-M
E: Connect to the AP again and visit the webpage. Check for the IP-Address
F: Close the webpage. Connect the Computer to the selected network.
G: Enter the IP to the target Software
