TMBA_B-BAPS-e-2010
19
7.6 Mains connection (option)
Power is supplied by the external power unit which also serves to isolate the mains
supply from the scale. The stated voltage value must be the same as the local
voltage.
Only approved genuine KERN power supply units may be used in compliance with
Directive EN 60601-1.
7.7 Optional equipment mains adapters
Available mains adapters (optional)
•
YKA-43
•
YKA-44
7.8 Initial Commissioning
In order to obtain exact results with the electronic balances, your balance must have
reached the operating temperature (see warming up time chap.1). During this
warming up time the balance must be connected to the power supply (mains,
accumulator or battery) and be switched on.
The accuracy of the balance depends on the local acceleration of gravity.
The value of gravity acceleration is shown on the type plate.
8 Operation
8.1 Weighing
Start balance by pressing
.
The balance carries out a self-test.
The scales are ready for operation as soon as the weight display
for “0.000 kg” has appeared.
However, you can reset the weighing scale to zero by pressing
the
key.
Put baby in the centre of the weighing pan.
Wait for the stability display
, then read the weighing
result.
If the baby is heavier than the max. weighing range, the display
shows "oL" (=overload) and a beep sounds.
