En 14 / 56
7. Blade guide assembly loose
8. Blade truck too far away
from wheel flanges
6. Adjust guide space.
7. Tighten
8. Re-track blade according to operating
instructions.
Bad Cuts (Rough)
1. Too much speed or feed
2. Blade is too coarse
3. Blade tension loose
1. Decrease speed or feed.
2. Replace with finer blade.
3. Adjust blade tension.
Blade is twisting
1. Cut is binding blade.
2. Too much blade tension
1. Decrease reed pressure.
2. Decrease blade tension.
Saw arm can not Be
raised up after Pushing
the raising Button
1.Improper setting of depth
gauge
1. Press the emergency stop Button and
RESET.
2. Check the upper limit switch and stop
round Position. Make sure the limit switc
is always underneath the stop roun bar.
3. Check the oil gauge; make sure the oil is
in proper range.
4. Check the motor revolution direction;
make sure the motor revolution is in
clock-wise direction.
Summary of Contents for SX-824DG
Page 49: ...47 56...
