- 10 -
n
HOW TO EMPTY THE DUST CONTAINER/GENERAL MAINTAINANCE
You will want to empty the dirt in the dust container as soon as it has reached the “FULL” mark indicated on the
outside of the Dust Container.
WARNING: Do not fill the Dust Container above the “FULL” mark. This can cause the filters to clog and
result in poor performance of you vacuum cleaner.
To empty the Dust Container, please follow the instructions below.
1.
Ensure the vacuum cleaner is in the “Off” position and disconnected from any plug or wall outlet.
2. Hold the dust container low over your trash receptacle, to avoid dust falling onto your floors.
3. Release the left side dust container door, by pressing on the release tab. (PIC 11)
4. Close the dust container door. (PIC 12)
n
HOW TO CLEAN AND REPLACE THE HEPA FILTER
(When the HEPA filter is dirty and the suction power is reduced, you must clean or replace the HEPA filter.)
1.
Release the “Right” side dust container door (Just as you would with the Left side door, shown in PIC 11
above).
2. Once the door is released, you simply pull the filter out of the vacuum. (PIC 13)
3. Clean the filter using warm water and a mild hand soap, thoroughly rinse the filter, then allow the filter to air
dry completely. Once the filter has completely air dried, then assemble the filter back into the container. Or, if
the filter is too dirty or in an unusable condition, replace the filter with a new one.
