- 7 -
ASSEMBLY INSTRUCTIONS
Assembling your Prolux Flight vacuum cleaner
NOTE:
Always remove the power plug from the wall outlet before assembling or removing accessories.
1. Insert the male end of the aluminum wand into the main handheld motor unit and press together, until you
head an audible “click”. (PIC 1)
2. Insert the power nozzle into the female end of the aluminum wand and press together until you head an
audible “click”. (PIC 2)
3. Attach the Onboard tool caddy to the aluminum wand, and secure the caddy to the wand by aligning the hole
on the caddy to the hole on the wand and install the included screw to hold it into place. Then press the
attachments onto the caddy.
4. To disassemble the main handheld unit and power nozzle from the main aluminum wand, you will press the
release buttons, which are located on each end of the wand, and pull the handheld unit or power nozzle away
from the wand. (PIC 5 – PIC 6)
WARNING
To reduce the risk of electric shock, the power cord must be disconnected before
removing the dust container, changing the filters or performing maintenance or
troubling shooting checks
