9
Chapter 4
Installation
Step 2 – Mounting Kit, Parts and Tools
mounting kit provided with AQ550
includes a mounting plate, which holds the appliance to the wall,
and 4 screws and wall anchors suitable for plastered drywall — 2 short flat-head screws and 2 longer round-
head screws. If you have another surface you will need to get anchors suitable for the wall material and
screws that work with these anchors. The screws need to be the same length as the ones provided —
2 long round-head screws and 2 short flat-head screws. You will need the following tools:
1. A good level to help you make the mounting plate
exactly horizontal.
2. A hammer.
3. A Phillips screwdriver to match the screws provided
or whatever screwdriver matches the screws needed
to attach to the anchors you have chosen.
4. A pointed tool like a small screwdriver to insert through
the holes on the appliance to mark the right spot for
the anchors.
5. A Drill.
Step 3 – Position the Mounting Bracket
Place the mounting bracket directly over the power outlet (if hardwired or plugged elsewhere, position
the mounting bracket to the side of the power source). Use the level to make sure the mounting bracket is
horizontal. While holding the bracket level, use a pointy tool, screw or screwdriver to mark the location of
the top two wall anchors. Check again with the level to ensure the bracket is horizontal.
4
