26
Chapter 6
OPERATING INSTRUCTIONS
HINT: To set the same programs for Monday to
Friday, you may set the programs for everyday first
and then disable Saturday and Sunday.
You may review the programs by doing the same as in programming. Just beware not to accidentally set
the everyday programs as this will also set and change the programs of all the days.
Setting Scent Intensity
1. Determine the approximate size of the room in cubic feet or cubic meters by multiplying length x width
x ceiling height.
2. Consult the
to give you a level (1 to 50) to set. THIS IS ONLY A STARTING POINT.
Hint: There are many variables to finding the scent level that works:
size, airflow, number of fresh air changes per hour, number of
people in the space and, most of all, user preferences. Experiment
with different levels until you are satisfied. Utilize the S3 Tool.
Scent Control
If you followed the Room-Size Chart or S3 Tool, you have set AQ550 to the low end of the range for your
room size. If after one hour you feel the scent is not detectable, increase the setting by about 10%. For
example, if your start setting was 20, increase it by 10%, or to setting 22. Keep increasing until you and
others in the space can detect a slight scent throughout the space.
The Last Step
1. Set the appliance to either
24/7 or Run Program.
2. Make sure the power is on. The blue light will show through the button.
3. Close and lock the door, storing the key in a known place.
6
