1. Click the “WiFi test” button to check if the IP Camera can connect to the wireless network for these
settings. You will need to unplug the Ethernet cable to enable the wireless connection after the “WiFi test”
is successful.
2. Click the “WiFi scan” button to scan for all the available access points nearby.
3. If you want to define fixed IP address when using WiFi connection, please press the “IP address” button
and key in your preferred IP address.
4. After you have modify any setting, click Save & Apply”, do not need to restart the IP Camera to let the WiFi
work, only need to unplug the Ethernet cable.
5. The default setting is “Disable WiFi Function”.
Figure 3-8: WiFi security enabled page
Figure 3-9: WiFi testing page
EN 15
Summary of Contents for PIC1007WP
Page 2: ......
