Client: Installation for UNIX
32
2-Tier Installation
while your request for a permanent license is being processed. The Start-up
License is provided on a PC floppy disk and on paper.
If you wish to install the license from the PC floppy disk, you may need to mount
the floppy on another computer and then transfer the Start-up License file to the
computer on which you are installing Prolifics software, using a transfer file utility
such as ftp. Copy the
license.dat
file to
/usr/prolifics/licenses
or to
the
/licenses
subdirectory of your Prolifics installation.
Alternatively, enter the contents of
license.dat
from the paper copy provided.
The following additional procedures might be required to configure Prolifics on a
UNIX system:
`
If you are installing Prolifics as a UNIX client, you need to set several
application variables and set up access to several configuration files for the
client. For information on configuring the client environment, refer to page 38.
`
If you are using a database other than JDB, you must edit the
makefile
and
the database-specific file, and then rebuild Prolifics executables to link in
support for your database. Refer to page 36 for information on creating new
Prolifics executables.
Additional
Procedures
