Fig. 5
This operation can be summarized in the following steps:
-
choose the measuring device corresponding to the lamp you want to mount and place
it on the projector to measure the distance to which the lamp holder should be placed,
as shown in Fig. 5.
-
Act on the hexagonal screw, highlighted in red in Figure 6, to move the position of the
lamp holder forward or backward depending on the distance indicated by the
measuring device.
Fig. 6
6. Close the access door to the control panel making sure that the projector has been
closed properly again and in all its parts before turning it on (the lamp emits rays
harmful to the eyes).
8
